Totop

Wisycom Zubehör

ADFA Wideband Omnidirectional Active Antenna with remote controlled filters

Wisycom ADFA is an omnidirectional antenna with a unique design to achieve an ultrawideband of 430 -1160 MHz.
ADFA integrate a unique bank of filters along with a low noise amplifier. Filters and gain can be easily setup locally thru a 4 key navigation buttons and a TFT display or remotely with a data connection on the same RF coaxial cable.
Using the latest Wisycom filter technology, ADFA gives a full control of RF zones and allows to build flexible and remote controllable antenna systems.

FEATURES

    Huge reception band: 430-1160 MHz
    Remote controllable thru coax cable (with MAT244/MAT288/SPL2208/SPL2216)
    RF gain from -12 to +27 dBu (1 dB step)
    Easy configuration thru a TFT display
    Tunable filter for interference control
    Antenna off for RF zone disabling
    Fixed band saw filter
    3 High Pass & 3 Low Pass filters
    Waterproof with gasket sealing

 

LFA
Wideband Active Antenna with remote controlled filters

Description Technical Data Downloads FW Releases Accessories Video

LFA is a directional antenna with a unique design to achieve an ultra-wideband of 410-1300 MHz, a compact and rugged form factor and a reduce wind resistance. LFA integrate a unique bank of filters along with a low noise amplifier. Filters and gain can be easily setup locally thru a 4 key navigation buttons and a TFT display or remotely with a data connection on the same RF coaxial cable.
Using the latest Wisycom filter technology, LFA gives a full control of RF zones and allows to build flexible and remote controllable antenna systems.

FEATURES

    Huge reception band: 410-1300 MHz
    Remote controllable thru coax cable (with MAT244/MAT288/SPL2208/SPL2216)
    RF gain from -12 to +27 dBu (1 dB step)
    Easy configuration thru a TFT display
    Tunable filter for interference control
    Antenna off for RF zone disabling
    Fixed band saw filter
    Skeletal design for low wind loading
    3 High Pass & 3 Low Pass filters
    Waterproof with gasket sealing

 

LBNA2 Active Wideband Antenna

LBNA2 is a wideband UHF antenna LPDA (log periodic dipole Array).
It enhances reception providing approx. 6dB gain with a typical beam-width of 90 degrees.

FEATURES

    AGILE: working bandwidth of 470-870 MHz
    EASY & QUICK TO USE: LED display & function buttons
    RUGGEDIZED: sturdy metal body construction and epoxy protection on cable joints
    HIGH-PERFORMANCES: optimized 6dB gain with a typical beam-width of 90 degrees
    INTEGRATED BOOSTER: very high linear booster (OIP3 40 dBm) with 15 dB gain settable in one step dB step


MCR54 slot-in

BPA54 “Stand alone” rear panel
SLK54-IK "SUPERSLOT/UNISLOT"
SLK54-SX2 Slot in for SONY camera

Wisycom PHA60-D 12V / 48V Phantom adapter

PHA60-D Phantom adapter
12V / 48V Phantom adapter with felt hook for easy pole attachment

Connectors:

    mini XLR-5M (to the TX)
    mini XLR-3M (to the MIC)


BCA42


BATTERY POWER SUPPLY MODULE (5 X 1.5V AA)
- Batteries included
NOTE: BPA42 must be installed
Compatible with: MCR41-42


BPA42HPN


"STAND-ALONE" REAR-PANEL
- 2 mini XLR-3pin male output (2 main analogue audio channel or 2 digital AES on 1st mini XLR)
- 1 locking mini jack Stereo Plug 3.5mm(TRS)
- 1 Hirose connector for external power
NOTE: to be used with proper back-panel (i.e. FLA42 or FLA42-SX)
NOTE: Audio/Power cable are not included
Compatible with: MCR41-42


BPA42PTT

"STAND-ALONE" REAR-PANEL
- 2 mini XLR-3pin male output (2 main analogue audio channel or 2 digital AES on 1st mini XLR)
- 1 mini XLR-5pin male output (2 auxiliary audio output from push to talk function)
- 1 Hirose connector for external power
NOTE: to be used with proper back-panel (i.e. FLA42 or FLA42-SX)
NOTE: Audio/Power cable are not included
Compatible with: MCR41-42


PHA48


PLUG-ON FOR XLR3 MIC WITH 48V PHANTOM POWER.
- To be used with CAL48 (connected to an MTP30)
NEW REV2 with 4mA Phantom current!
Compatible with: MTP30; MTP40