Totop

Wisycom Zubehör

ADNA WIDEBAND OMNIDIRECTIONAL ANTENNA WITH INTEGRATED BOOSTER

WIDEBAND OMNIDIRECTIONAL ANTENNA WITH INTEGRATED BOOSTER
ADNA is a wideband UHF omnidirectional antenna.
It enhances reception providing approx. 3.2 dBi gain.
Booster version (ADNA) gains up to 18dB in 1 dB step.
FEATURES

AGILE: working bandwidth of 470-800 MHz
RUGGEDIZED: sturdy metal body construction and epoxy protection on cable joints
HIGH-PERFORMANCES: optimized 3.2dB gain

Frequency       470 - 800 MHz (BOOST), 400 - 930 MHz (ANT)
Input/output   impedance     50 ohm
SWR                < 1:1.5 in the range 470 - 800 MHz (BOOST)
                       < 1:1.9 in the range 400 - 930 MHz (ANT)
Connectors     N
Booster Gain (max)    0÷18 dB (typical), selectable in step of 1 dB (+/- button)
OIP3                 +43 dBm (Output 3° order Intercept Point) typical
Booster Gain flatness     ±1 dB, in the whole working window
Powering        +12 V, 100mA
Dimension       mm L x mm H x 65 D
Material           epoxy fiberglass (copper–clad)
Finishing          Black matte
Mounting         5/8" Withworth or 3/8" with adapter
Weight            450g


BCA42


BATTERY POWER SUPPLY MODULE (5 X 1.5V AA)
- Batteries included
NOTE: BPA42 must be installed
Compatible with: MCR41-42


BPA42BAG


"STAND-ALONE" REAR PANEL FOR ENG BAG
- 2 cables for main analogue/digital audio channels (pigtail)
Pin out Line 1/2: Shield= GND, RED= Positive, Blue= Negative
- 1 cable for external power (pigtail)
Pin out power supply: Shield= NC, RED= +Vdc, Blue= GND
XXH OPTION :
BPA42BAG with connectors (2 XLR-3M and Hirose 4pin)


BPA42HPN


"STAND-ALONE" REAR-PANEL
- 2 mini XLR-3pin male output (2 main analogue audio channel or 2 digital AES on 1st mini XLR)
- 1 locking mini jack Stereo Plug 3.5mm(TRS)
- 1 Hirose connector for external power
NOTE: to be used with proper back-panel (i.e. FLA42 or FLA42-SX)
NOTE: Audio/Power cable are not included
Compatible with: MCR41-42


BPA42PTT

"STAND-ALONE" REAR-PANEL
- 2 mini XLR-3pin male output (2 main analogue audio channel or 2 digital AES on 1st mini XLR)
- 1 mini XLR-5pin male output (2 auxiliary audio output from push to talk function)
- 1 Hirose connector for external power
NOTE: to be used with proper back-panel (i.e. FLA42 or FLA42-SX)
NOTE: Audio/Power cable are not included
Compatible with: MCR41-42


PHA48


PLUG-ON FOR XLR3 MIC WITH 48V PHANTOM POWER.
- To be used with CAL48 (connected to an MTP30)
NEW REV2 with 4mA Phantom current!
Compatible with: MTP30; MTP40


UPK300E


INFRARED PROGRAMMING KIT
(interface + software) USB interface
Compatible with: MCR41-42; MPR30-ENG; MPR30-IEM; MPR30-IFB; MTH300; MTH400; MTP30; MTP40; MTP41