Totop

Cinela PIA-1 Windshield for half shotgun mikes

The Reference PIA-1 is composed of the cage with single axis swivel and light XLR extension (machined Neutrik XLR bodies), the main fabric, a suspension of your choice (PIA-OSIX-xxx) and a fur (PIA-FUR-SP: short pile or PIA-FUR-LP: long pile). Regarding lightness and efficiency, it is not simply possible to upgrade a PIA-1 to PIA-2 or PIA-3. Expecting a MS or double MS version, it is hardly advised to acquire a PIA-2 or PIA-3 directly, which are fully compatible with mono use (inner datachable cables).

Compatible Microphones: Sennheiser MKH 416, Sanken CS-3e, Schoeps CMIT 5U, Neumann KMR 81, Sennheiser MKH 60, DPA 4017


Cinela PIA-2 PIANO windshield for MS pair

MS version of the PIA-1 windshield.
Highly adapted to the MS Schoeps CMIT + CCM8, the PIA-2 can handle other microphones with proper suspension/wiring (Neumann KMR81, Ambient AT208 Emesser). Please contact your dealer for any request.
The Figure of 8 microphone is connected with a detachable cord (male Binder + femelle on chassis).
PIA-2S: standard swivel, perfect for mono main usage.
PIA-2D: double axis swivel, perfect for stereo main usage.
Fur to be precised. (PIA-FUR-SP: short pile. PIA-FUR-LP: long pile).


Cinela PIA-3 PIANO windshield for Double MS system

Double MS version of the PIA-1 windshield.
Highly adapted to the DMS Schoeps CMIT + CCM8 + CCM4, the PIA-3 can handle other microphones with proper suspension/wiring. Please contact your dealer for any request.
The CCM8 and CCM4 microphones are connected with detachable cords (male Binder + femelle on chassis).
PIA-3S: standard swivel, perfect for mono main usage.
PIA-3D: double axis swivel, perfect for stereo/DMS main usage.
Fur to be precised. (PIA-FUR-SP: short pile. PIA-FUR-LP: long pile).


Cinela ZEPHYX windshield with MINIX 8000 for SENNHEISER

Complete windshield consisting of a MINIX suspension set X-SET-8000 for Sennheiser MKH 8000 (XLR version) and a wind set Z-WIND.

The suspension set is quickly unscrewed from the cage for an immediate indoor use.

Compatible Microphones: Sennheiser MKH 8040, Sennheiser MKH 8050


Z-CCM-MS ZEPHYX windshield for Schoeps MS CCM

Complete windshield consisting of a suspension set X-SET-MS for Schoeps CCM MS and a wind set Z WIND.

Schoeps microphones CCM4/8 (Lg) has to be naturally screwed in the LEMO connector inserted in the cradle. The wiring ends with a standard 5-pins XLR. The unit can be used indoors using the double holes WMS foam from Schoeps.

It is possible to mount a single microphone to use a lighter mono configuration. In this case, the set is compatible with the full range of small Schoeps foams and windscreens (except W20R with fur). The use of the B5D is recommended inside the cage, when the main fabric is used alone (without fur).

For optimal security during transportation or in case of shock, the cradle is equipped with an elastic cord to act as "safety belt".

Compatible Microphones: Schoeps CCM MS


LEO-20 / 25 LEONARD ball for mikes with fur

LEO-20

Wind protection ball (10cm diameter), for 20mm diameter microphones, like the Schoeps CMC. Main fabric for indoor use (Zephyx alike). Extra fur for outdoor use. Compatible with the standard configuration CMC/OSIX 2

LEO-25

Wind protection ball (10cm diameter), for 25mm diameter microphones, like the Sennheiser MKH50. Main fabric for indoor use (Zephyx alike). Extra fur for outdoor use. Compatibility with a MKH50/OSIX3